With great machinery comes great responsibility.
A crane construction site is for heavy construction, requiring a possible variety of lifting needs. To pick up and often carry bulky materials to high spots, a lot of forethought and strategy goes into each move. Before crane leasing, be sure to consider how big the area the project will be worked on. You will also want to be knowledgeable of the terrain of the site so you can ensure proper wheels.
Other points to keep in mind when selecting a rental are:
- How heavy the materials are
- If you will need to store the crane at any point
- The timeline of completion
Using a construction site crane requires a whole new level of security measures to be taken. When you look up boom crane rental near me, make sure you go with a company that you can look into. Any company can have the equipment you need for a big job, but not every company follows procedures. Something like an overhead crane repair needs to be done correctly. Before agreeing on a particular crane, or any heavy equipment, you will want to give the unit a thorough inspection.
During a 1997 and 2006, the Bureau of Labor and Statistics reports approximately 82 death’s due to crane operation every year. Prone to tipping, cranes are without a doubt dangerous machines that should be handled with care and forethought. The rate of tipping incidents, referred to as “upsets,” is one in every 10,000 and can result from a variety of factors, from ineffective ground protection mats to mistakes during operation. Compiled here are seven tips to help avoid a potentially fatal upset.
- At the beginning of the job, purchase or rent appropriate equipment from a crane mat company. Reducing a crane’s down bearing pressure also reduces the likelihood of an upset from the crane’s outrigger pads sinking into the soil. If unsure about what mat is needed, consult with the crane mat company to be certain of your selection.
- Before setting up the crane, double check that nothing has changed in the ground conditions. Inclement weather, among other things, could have softened soil and created a hazard for crane operation.
- Operators should visually check the crane for mechanical, electrical, structural and hydraulic issues before every shift.
- Operators should check all of the crane’s fluid levels, like gas and oil, and read the load charts. This should happen before the key is even in the ignition.
- During operation, anything overhead becomes hazardous and operators must be aware of any nearby buildings or power lines.
- Operators must also be aware of any conditions on the job site that change. This can include anything from people to weather, essentially anything that could effect crane operation. If a condition on the site changes in a way that could be hazardous, it is the crane operator’s job to evaluate whether a new plan must be made.
- Eliminate outside distractions during operation. Cell phones, for example, should be off the moment the key is turned.
Employing a crane on any job will always carry a certain amount of risk. This risk can be drastically reduced, however with advanced planning and operator training and diligence, as is detailed in this list. With these guidelines, an upset resulting from worker action or inaction will be almost eliminated. References.